Risk Assessment · Drainage Engineers
Risk Assessment for Drainage Engineers
A standalone risk assessment following HSE's 5 steps: who might be harmed and how, and the controls that make the work safe. Below: what a drainage engineer's Risk Assessment must contain, why they get rejected, and the hazards it has to cover, or generate one for your exact job in a couple of minutes.
What a compliant Risk Assessment must contain
- Hazards specific to the actual task, site and materials
- Who might be harmed and how, for each hazard
- The controls already in place PLUS any further action needed
- A before/after risk score and a review date
Why a drainage engineer's Risk Assessment gets rejected
- Copied from a generic example (HSE: 'would not satisfy the law')
- Controls that don't match what the business actually does
- No record of who does the further actions, or by when
- An auto-fail hazard (confined space, asbestos, live electrical) wrongly marked 'N/A'
Already have one? Check it against the standard, free.
Paste your RAMS into the free checker and it scores it the way an inspector would, and flags exactly what would get it rejected. No sign-up.
Check yours freeDrainage Engineers hazards it must cover
Typical drainage engineer work, meaning Installs, clears, repairs and surveys below-ground drainage systems, including excavating trenches, rodding and jetting blockages, relining pipes, and inspecting sewers by CCTV camera., brings hazards a Risk Assessment has to address:
- Confined space entry into manholes and chambers
- Hydrogen sulphide and methane from sewage and decomposing matter
- Biological contamination from raw sewage (leptospirosis, hepatitis)
- Collapse of unsupported excavations and trench walls
- High-pressure water jetting causing injection injuries and lacerations
- Asbestos in pre-2000 pitch-fibre and asbestos-cement pipes
Generate your Risk Assessment in minutes
Built to the correct published standard for a drainage engineer: specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your Risk AssessmentFAQ
Do drainage engineers legally need a Risk Assessment?
A standalone risk assessment following HSE's 5 steps: who might be harmed and how, and the controls that make the work safe. For drainage engineer work, meaning Installs, clears, repairs and surveys below-ground drainage systems, including excavating trenches, rodding and jetting blockages, relining pipes, and inspecting sewers by CCTV camera., it is the document a client, principal contractor or inspector expects to see, grounded in MHSWR 1999 reg 3 (HSE): the 5-step method (INDG163).
What makes a drainage engineer's Risk Assessment fail?
The usual reasons: Copied from a generic example (HSE: 'would not satisfy the law'); Controls that don't match what the business actually does; No record of who does the further actions, or by when. RAMSReady generates one to the correct published form and avoids these.
How fast can I get a Risk Assessment?
A couple of minutes. Describe the job, and RAMSReady writes a Risk Assessment for your exact drainage engineer job live against the correct standard, with a review date and a sign-off/records section.