RAMS Rejected Because No Competent Person Is Named: How to Fix It
Getting a RAMS bounced back with a note about a "missing competent person" is one of the most common rejection reasons on managed sites. It feels vague, but the requirement behind it is real and straightforward to fix once you understand what reviewers are actually looking for.
What the Requirement Is Based On
The duty to appoint a competent person comes from regulation 7 of the Management of Health and Safety at Work Regulations 1999. It requires every employer to appoint one or more competent persons to assist in undertaking the measures needed to comply with health and safety law. A competent person is defined as someone with sufficient training, experience, knowledge and other qualities to enable them to assist properly.
Your RAMS is a live document that describes how the work will be done safely. If it does not show that someone with the right knowledge has been involved in producing it, or will be overseeing the work, reviewers have no way to trust that the controls in the method statement are realistic or adequate. That is why they reject it.
On construction projects, CDM 2015 adds further weight. Principal contractors are required under Schedule 2 to satisfy themselves that contractors they appoint have the skills, training, experience and organisational capability appropriate to the work. A RAMS with no named or described competent person makes that check impossible.
Why Reviewers Reject on This Specific Point
Reviewers are not being pedantic. A RAMS that lists hazards and controls but names nobody responsible for safety supervision could have been copied from a template by someone with no knowledge of the actual task or site. Common red flags that trigger rejection include:
- No name or role listed under "prepared by" or "competent person"
- A generic company name in place of an individual
- No indication of relevant qualifications, trade experience or training
- A supervisor named in the method statement who is not linked to any described competence
- Obvious mismatch, for example a groundworks operative named as the competent person for electrical isolation
What to Include to Satisfy the Reviewer
You do not need a lengthy CV section. You need a short, clear statement that covers three things: who the competent person is, what their relevant experience or qualifications are, and what their role is during the works.
A practical format might look like this in your RAMS:
Competent Person for This Task
| Field | Detail |
|---|---|
| Name | J. Patel |
| Role on site | Working supervisor |
| Relevant qualifications | NVQ Level 3 Plumbing, 12 years commercial pipework |
| Specific to this task | Completed confined space awareness training (date), PASMA-trained for tower scaffold |
Keep it specific to the task. If your RAMS covers hot works, name the person who holds the hot works permit competency. If it covers work at height under the Work at Height Regulations 2005, link that person to their relevant training or experience for the equipment being used.
Sole Traders and Small Firms
If you are a sole trader, you can name yourself, but you still need to demonstrate competence rather than simply stating your company name. A one-liner such as "Gas Safe registered (licence number 123456), 15 years domestic and commercial installation" is concise and credible. For higher-risk tasks, attach copies of relevant certificates as appendices or note that they are available on request.
Small firms sometimes list a director or owner who will not actually be on site. If that person is genuinely supervising, say so. If the working supervisor is someone else, name them instead. Reviewers check for consistency: if the method statement refers to the site supervisor giving toolbox talks and signing permits, that person needs to be the one whose competence is evidenced.
Common Mistakes to Avoid
Avoid these pitfalls that lead to a second rejection:
- Naming a competent person in the risk assessment section but not in the method statement, or the other way around
- Listing qualifications that have expired (for example, a first aid certificate from eight years ago)
- Describing competence only in terms of company accreditations (CHAS, Constructionline) without linking to an individual
- Using the phrase "a competent person will be appointed" without saying who that is
If You Are Revising a Rejected RAMS
Go back to the document and add a dedicated section titled "Competent Person" near the front, before the hazard register. Update the version number and date. If the reviewer gave specific comments, respond to each point directly in the revised cover note. Principal contractors working under CDM 2015 may also want a copy of relevant certificates before they accept the resubmission, so having those ready saves a further round of correspondence.
Naming a competent person is not a box-ticking exercise. It is the foundation that makes the rest of your RAMS credible.