Risk Assessment · Locksmiths
Risk Assessment for Locksmiths
A standalone risk assessment following HSE's 5 steps: who might be harmed and how, and the controls that make the work safe. Below: what a locksmith's Risk Assessment must contain, why they get rejected, and the hazards it has to cover, or generate one for your exact job in a couple of minutes.
What a compliant Risk Assessment must contain
- Hazards specific to the actual task, site and materials
- Who might be harmed and how, for each hazard
- The controls already in place PLUS any further action needed
- A before/after risk score and a review date
Why a locksmith's Risk Assessment gets rejected
- Copied from a generic example (HSE: 'would not satisfy the law')
- Controls that don't match what the business actually does
- No record of who does the further actions, or by when
- An auto-fail hazard (confined space, asbestos, live electrical) wrongly marked 'N/A'
Already have one? Check it against the standard, free.
Paste your RAMS into the free checker and it scores it the way an inspector would, and flags exactly what would get it rejected. No sign-up.
Check yours freeLocksmiths hazards it must cover
Typical locksmith work, meaning Fitting, replacing, rekeying and repairing locks, access control hardware and door furniture on residential, commercial and vehicle premises across the UK., brings hazards a Risk Assessment has to address:
- Manual handling of heavy door sets and safe units
- Hand tool injuries from picks, drills and chisels during forced entry
- Noise and vibration from angle grinders and hammer drills (HAVs exposure)
- Asbestos in pre-2000 fabric disturbed when drilling into walls or door frames
- Working alone in unsecured or unfamiliar premises
- Contact with contaminated needles or sharps in residential lock changes
Generate your Risk Assessment in minutes
Built to the correct published standard for a locksmith: specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your Risk AssessmentFAQ
Do locksmiths legally need a Risk Assessment?
A standalone risk assessment following HSE's 5 steps: who might be harmed and how, and the controls that make the work safe. For locksmith work, meaning Fitting, replacing, rekeying and repairing locks, access control hardware and door furniture on residential, commercial and vehicle premises across the UK., it is the document a client, principal contractor or inspector expects to see, grounded in MHSWR 1999 reg 3 (HSE): the 5-step method (INDG163).
What makes a locksmith's Risk Assessment fail?
The usual reasons: Copied from a generic example (HSE: 'would not satisfy the law'); Controls that don't match what the business actually does; No record of who does the further actions, or by when. RAMSReady generates one to the correct published form and avoids these.
How fast can I get a Risk Assessment?
A couple of minutes. Describe the job, and RAMSReady writes a Risk Assessment for your exact locksmith job live against the correct standard, with a review date and a sign-off/records section.