Risk Assessment · Door and Shutter Engineers
Risk Assessment for Door and Shutter Engineers
A standalone risk assessment following HSE's 5 steps: who might be harmed and how, and the controls that make the work safe. Below: what a door and shutter engineer's Risk Assessment must contain, why they get rejected, and the hazards it has to cover, or generate one for your exact job in a couple of minutes.
What a compliant Risk Assessment must contain
- Hazards specific to the actual task, site and materials
- Who might be harmed and how, for each hazard
- The controls already in place PLUS any further action needed
- A before/after risk score and a review date
Why a door and shutter engineer's Risk Assessment gets rejected
- Copied from a generic example (HSE: 'would not satisfy the law')
- Controls that don't match what the business actually does
- No record of who does the further actions, or by when
- An auto-fail hazard (confined space, asbestos, live electrical) wrongly marked 'N/A'
Already have one? Check it against the standard, free.
Paste your RAMS into the free checker and it scores it the way an inspector would, and flags exactly what would get it rejected. No sign-up.
Check yours freeDoor and Shutter Engineers hazards it must cover
Typical door and shutter engineer work, meaning Install, maintain and repair industrial, commercial and domestic doors, roller shutters, sectional overhead doors, fire doors and access control systems on site., brings hazards a Risk Assessment has to address:
- Crush and trap injuries from powered door and shutter mechanisms during commissioning and testing
- Working at height on access equipment to install overhead gear, tracks and curtain boxes
- Manual handling of heavy door leaves, shutter curtains and steel sections
- Stored energy hazards from torsion springs under high tension
- Electrical hazards from wiring motorised drives and control panels (connection to supply)
- Asbestos in pre-2000 building fabric disturbed when cutting or drilling fixings into walls and lintels
Generate your Risk Assessment in minutes
Built to the correct published standard for a door and shutter engineer: specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your Risk AssessmentFAQ
Do door and shutter engineers legally need a Risk Assessment?
A standalone risk assessment following HSE's 5 steps: who might be harmed and how, and the controls that make the work safe. For door and shutter engineer work, meaning Install, maintain and repair industrial, commercial and domestic doors, roller shutters, sectional overhead doors, fire doors and access control systems on site., it is the document a client, principal contractor or inspector expects to see, grounded in MHSWR 1999 reg 3 (HSE): the 5-step method (INDG163).
What makes a door and shutter engineer's Risk Assessment fail?
The usual reasons: Copied from a generic example (HSE: 'would not satisfy the law'); Controls that don't match what the business actually does; No record of who does the further actions, or by when. RAMSReady generates one to the correct published form and avoids these.
How fast can I get a Risk Assessment?
A couple of minutes. Describe the job, and RAMSReady writes a Risk Assessment for your exact door and shutter engineer job live against the correct standard, with a review date and a sign-off/records section.