Risk Assessment · CCTV and Security System Installers
Risk Assessment for CCTV and Security System Installers
A standalone risk assessment following HSE's 5 steps: who might be harmed and how, and the controls that make the work safe. Below: what a security systems installer's Risk Assessment must contain, why they get rejected, and the hazards it has to cover, or generate one for your exact job in a couple of minutes.
What a compliant Risk Assessment must contain
- Hazards specific to the actual task, site and materials
- Who might be harmed and how, for each hazard
- The controls already in place PLUS any further action needed
- A before/after risk score and a review date
Why a security systems installer's Risk Assessment gets rejected
- Copied from a generic example (HSE: 'would not satisfy the law')
- Controls that don't match what the business actually does
- No record of who does the further actions, or by when
- An auto-fail hazard (confined space, asbestos, live electrical) wrongly marked 'N/A'
Already have one? Check it against the standard, free.
Paste your RAMS into the free checker and it scores it the way an inspector would, and flags exactly what would get it rejected. No sign-up.
Check yours freeCCTV and Security System Installers hazards it must cover
Typical security systems installer work, meaning Install, commission and maintain CCTV cameras, access control, intruder alarm systems and associated cabling in commercial and residential premises, brings hazards a Risk Assessment has to address:
- Working at height on ladders, towers and roof areas
- Live electrical conductors during cable termination and panel wiring
- Asbestos in pre-2000 fabric when drilling fixings or chasing cables
- Manual handling of equipment including camera mounts, control panels and cable drums
- Lone working in unoccupied or unfamiliar premises
Generate your Risk Assessment in minutes
Built to the correct published standard for a security systems installer: specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your Risk AssessmentFAQ
Do cctv and security system installers legally need a Risk Assessment?
A standalone risk assessment following HSE's 5 steps: who might be harmed and how, and the controls that make the work safe. For security systems installer work, meaning Install, commission and maintain CCTV cameras, access control, intruder alarm systems and associated cabling in commercial and residential premises, it is the document a client, principal contractor or inspector expects to see, grounded in MHSWR 1999 reg 3 (HSE): the 5-step method (INDG163).
What makes a security systems installer's Risk Assessment fail?
The usual reasons: Copied from a generic example (HSE: 'would not satisfy the law'); Controls that don't match what the business actually does; No record of who does the further actions, or by when. RAMSReady generates one to the correct published form and avoids these.
How fast can I get a Risk Assessment?
A couple of minutes. Describe the job, and RAMSReady writes a Risk Assessment for your exact security systems installer job live against the correct standard, with a review date and a sign-off/records section.