Risk Assessment · Insulation Installers
Risk Assessment for Insulation Installers
A standalone risk assessment following HSE's 5 steps: who might be harmed and how, and the controls that make the work safe. For insulation installer work, it has to cover falls through ceilings from loft joists. It must include hazards specific to the actual task, site and materials.
A standalone risk assessment following HSE's 5 steps: who might be harmed and how, and the controls that make the work safe. Below: what a insulation installer's Risk Assessment must contain, why they get rejected, and the hazards it has to cover, or generate one for your exact job in a couple of minutes.
A finished example
Example Risk Assessment from a similar trade (Industrial Furnace & Heat Treatment Maintenance)
We do not have a finished Risk Assessment for insulation installers yet, so this one is from industrial furnace & heat treatment maintenance: the layout, scoring and sign-off are what yours needs, but the hazards and method will be different for your job.
The job it was written for: “Job: servicing, repair and relining of industrial furnaces, ovens, kilns and heat-treatment plant. Commercial unit, occupied during working hours, 2 operatives, 1 day. Main risks: burns from hot surfaces and residual heat; confined-space entry into furnace chambers; refractory ceramic fibre and silica dust during relining.”. Names and contact details are anonymised.
Risk Assessment, Industrial Furnace & Heat Treatment Maintenance
| Document Title | Risk Assessment: Servicing, Repair and Relining of Industrial Furnaces |
| Company | Example Furnace Engineer Ltd |
| Assessor | A. Supervisor |
| Date of Assessment | 14 October 2026 |
| Version | V1.0 |
| Review Date | 14 October 2027 |
Company details
| Field | Detail |
|---|---|
| Company name | Example Furnace Engineer Ltd |
| Address | to be confirmed |
| Registration number | to be confirmed |
| Phone | 01283 000000 |
| Named supervisor | A. Supervisor |
| Insurance valid until | to be confirmed |
Task / Activity & Location
Activity: Servicing, repair and relining of industrial furnaces, ovens, kilns and heat-treatment plant.
Location: Unit 4, Example Trading Estate, Exeter EX2 8XX.
Context: The work will take place in an occupied commercial unit. The assessment covers a team of 2 operatives over a 1-day period.
Note on Control Measures: This assessment identifies the significant hazards and recommends necessary control measures. The responsible person, A. Supervisor, must confirm which controls are in place and implement any further actions required before work starts. All operatives must be briefed on these findings.
Hazard Assessment
| HAZARD | WHO might be harmed and HOW | RISK BEFORE CONTROLS: L × S = Score (Rating) | CONTROL MEASURES (recommended control measures, confirm/implement on site) | RISK AFTER CONTROLS: L × S = Score (Rating) | ACTION BY WHOM | BY WHEN |
|---|---|---|---|---|---|---|
| Confined Space Entry<br>Entry into furnace/oven chamber for relining or repair. | Operatives inside the chamber could be harmed by: asphyxiation from oxygen deficiency or hazardous fumes; fire/explosion; becoming trapped; heat stress. Rescue personnel could be harmed during an unplanned rescue. | 5 × 5 = 25<br>(Very High) | ⛔ STOP, DO NOT ENTER. A safe system of work and emergency rescue arrangements are a legal precondition to entry under the Confined Spaces Regulations 1997.<br>1. Avoid entry: Complete all possible work from outside the furnace.<br>2. Permit-to-Work: If entry is unavoidable, a formal permit-to-work system must be used, detailing all precautions.<br>3. Isolation: The furnace must be fully isolated from all energy sources (electrical, gas, pneumatic, hydraulic) and material feeds. Physical disconnection and lock-off is required.<br>4. Purging & Ventilation: The furnace chamber must be purged of any process atmospheres and then continuously ventilated with fresh air.<br>5. Atmosphere Testing: A calibrated multi-gas detector must be used to test the atmosphere before entry and monitored continuously during entry. Test for oxygen levels, flammable gases, and toxic contaminants (e.g. CO). Record all results on the permit.<br>6. Competence: Only personnel specifically trained in confined space entry, use of gas detectors, escape breathing apparatus (EBA) and the rescue plan are permitted to enter or act as the 'top person'.<br>7. Top Person: A trained 'top person' must be stationed outside the entrance at all times, maintaining communication with the entrant and having no other duties.<br>8. Rescue Plan: A detailed, site-specific rescue plan must be in place and the necessary rescue equipment (e.g. tripod, winch, harness) immediately available at the entry point. See Rescue Plan section below. | 3 × 4 = 12<br>(High) | A. Supervisor | Before start of work |
| Electric Shock & Burns<br>Contact with live electrical components during maintenance. | Operatives could receive a potentially fatal electric shock or arc-flash burns from contact with live terminals, wiring or control gear. | 4 × 5 = 20<br>(Very High) | Dead working is the default. Live work is not permitted for this task.<br>1. Safe Isolation: Isolate all relevant circuits from the mains supply using a lockable isolator. The operative performing the work must use their own padlock and retain the only key (lock-off, tag-out).<br>2. Prove Dead: Use a GS38-compliant two-pole voltage indicator and a proving unit to prove the circuit is dead before and after testing. Test on all conductors.<br>3. Permit-to-Work: For complex systems, an electrical permit-to-work may be required.<br>4. Competence: Work is restricted to competent electricians holding relevant qualifications (e.g. BS 7671 18th Edition, ECS card).<br>5. Tools: Use insulated hand tools. All portable electrical equipment to be visually inspected before use and maintained in a safe condition. Use 110V CTE supply where practicable. | 2 × 4 = 8<br>(Medium) | A. Supervisor / Electrician | Before start of work |
| Exposure to Refractory Ceramic Fibres (RCF) & Respirable Crystalline Silica (RCS)<br>Inhalation of dust during removal of old lining material. | Operatives and others nearby can suffer serious, long-latency respiratory diseases (lung cancer, silicosis) from inhaling RCF or RCS dust. | 5 × 4 = 20<br>(Very High) | Engineering controls are primary. RPE is a last resort.<br>1. Substitution: Where possible, use modern lower-hazard insulation materials (e.g. low bio-persistent fibres) for relining.<br>2. Dust Suppression: Damp down old lining materials with a fine water spray before and during removal to minimise dust becoming airborne.<br>3. Extraction: Use on-tool extraction (H-class or M-class vacuum cleaner) attached to any cutting or grinding tools.<br>4. Segregation: Cordon off the work area to prevent entry by unauthorised personnel. Display warning signs.<br>5. RPE: Operatives must wear correctly fitted FFP3 disposable masks or a half-mask respirator with P3 filters for the duration of the removal work. A face-fit test record is required for each user of tight-fitting RPE.<br>6. PPE: Wear disposable coveralls (Type 5) to prevent contamination of clothing. Remove before leaving the work area and dispose of as contaminated waste.<br>7. Cleaning: Do not use compressed air or dry sweeping. Clean the area using an H-class vacuum cleaner. | 2 × 4 = 8<br>(Medium) | A. Supervisor | During work |
| Burns from Hot Surfaces<br>Contact with hot furnace casing, components or refractory materials due to residual heat. | Operatives could suffer serious skin burns from direct contact. | 4 × 4 = 16<br>(Very High) | 1. Cooling: Ensure the furnace has been shut down for a sufficient period to cool to a safe temperature before work commences. This must be verified and recorded on the permit-to-work.<br>2. Testing: Use a non-contact thermometer to check surface temperatures before handling components.<br>3. Signage: Post warning signs indicating "Danger: Hot Surfaces" on and around the equipment.<br>4. PPE: Wear thermal-resistant gloves (e.g. BS EN 407 rated) when handling any potentially hot items.<br>5. Briefing: Brief all operatives on the specific risks of residual heat in the furnace structure. | 2 × 3 = 6<br>(Medium) | A. Supervisor | Before start of work |
| Asbestos Exposure<br>Disturbance of unidentified Asbestos Containing Materials (ACMs) in older furnace plant (e.g. gaskets, insulation rope, insulating boards). | Operatives and others nearby could inhale asbestos fibres, leading to fatal long-latency diseases (e.g. mesothelioma, asbestosis). | 4 × 5 = 20<br>(Very High) | ⛔ STOP, CONFIRM AT SITE SURVEY:<br>1. Confirm Status: Check the site's asbestos register or have the furnace inspected by a competent person before any intrusive work begins. Assume asbestos is present in any pre-2000 plant unless proven otherwise.<br>2. Licensed Work: If ACMs are identified and will be disturbed, the work must be stopped. This work must be carried out by a licensed asbestos removal contractor under the Control of Asbestos Regulations 2012.<br>3. No Unlicensed Work: No unlicensed or untrained person is permitted to disturb or remove any material suspected of containing asbestos. | 1 × 5 = 5<br>(Medium) | A. Supervisor | Before start of work |
| Slips, Trips & Falls<br>Trips on tools, trailing leads, discarded materials or uneven surfaces in the work area. | Operatives and site staff may suffer minor to major injuries (fractures, sprains, contusions) from falls on the same level. | 3 × 3 = 9<br>(Medium) | 1. Good Housekeeping: Maintain a clean and tidy work area at all times. Store tools and materials away from walkways. Remove waste materials promptly.<br>2. Cable Management: Route cables away from walkways or use cable covers.<br>3. Lighting: Ensure the work area is well-lit.<br>4. Footwear: All operatives to wear safety footwear with non-slip soles (BS EN ISO 20345). | 2 × 2 = 4<br>(Low) | All operatives | During work |
| Manual Handling Injuries<br>Lifting and carrying tools, replacement parts or bags of refractory material. | Operatives may suffer musculoskeletal injuries (strains, sprains, back injury) from incorrect lifting techniques or handling heavy/awkward loads. | 3 × 3 = 9<br>(Medium) | 1. Assess the Load: Consider the weight, size and shape before lifting. Do not attempt to lift loads that are too heavy for one person.<br>2. Mechanical Aids: Use trolleys or other lifting aids for heavy components where possible.<br>3. Team Lifting: Use two or more people for heavy or awkward loads, with one person coordinating the lift.<br>4. Training: Ensure all operatives have received training in correct manual handling techniques.<br>5. Break Down Loads: Split loads into smaller, more manageable units (e.g. decant refractory material into smaller containers). | 2 × 2 = 4<br>(Low) | A. Supervisor / Operatives | During work |
Hazardous substances used
| Substance | Where used | Hazard | Controls | COSHH assessment ref. |
|---|---|---|---|---|
| Refractory Ceramic Fibres (RCF) | Furnace lining | Suspected carcinogen, respiratory irritant. | Engineering controls (dampening, extraction). RPE (FFP3) and PPE (coveralls, gloves). Segregation of work area. | COSHH-1 (generate) |
| Respirable Crystalline Silica (RCS) | Furnace lining (bricks, castables) | Carcinogen, causes silicosis. | Engineering controls (dampening, on-tool extraction). RPE (FFP3). Segregation. | COSHH-2 (generate) |
Competence and training
| Role | Required competence (cards, tickets, training) | Evidence held |
|---|---|---|
| All operatives | CSCS card (or equivalent trade scheme); site induction; manual handling training; asbestos awareness training. | to be confirmed by Example Furnace Engineer Ltd |
| Confined Space Entrants / Top Person | City & Guilds Medium Risk Confined Space Entry (or equivalent); specific training on gas monitor use and rescue plan. | to be confirmed by Example Furnace Engineer Ltd |
| Electricians | 18th Edition (BS 7671) qualification; ECS card; safe isolation training. | to be confirmed by Example Furnace Engineer Ltd |
| Named first aider (to be confirmed) | First Aid at Work (FAW) certificate, in date. | to be confirmed by Example Furnace Engineer Ltd |
Emergency arrangements
| Item | Detail |
|---|---|
| Site address | Unit 4, Example Trading Estate, Exeter EX2 8XX |
| Emergency contact | A. Supervisor, 01283 000000 |
| First aid | First aid kit to be kept in site vehicle. Named first aider: to be confirmed. |
| Nearest A&E | Royal Devon and Exeter Hospital (Wonford), Exeter. Confirm before start on site. |
| Fire assembly point | As per site induction. Extinguishers (water, foam, CO2, powder as appropriate) to be available in the work area. |
Rescue plan
This plan is mandatory for all confined space entry operations.
Rescuer role: The designated 'top person' is responsible for initiating the rescue. The second operative is the designated rescuer. No person shall enter the confined space to attempt a rescue unless trained and equipped to do so.
Rescue equipment: The following equipment must be present, inspected and ready for immediate use at the entry point before any entry occurs:
- Tripod and winch system (e.g. fall arrest and recovery block)
- Full body rescue harness (BS EN 1497) worn by entrant
- Escape breathing apparatus (EBA) for the entrant
- Self-contained breathing apparatus (SCBA) for the rescue team
- Calibrated multi-gas detector
- Communication equipment
- First aid kit and resuscitator
Rescue method:
- Alarm: The top person will raise the alarm immediately if communication is lost, the gas alarm sounds, or the entrant appears to be in distress.
- No Entry: The top person will NOT enter the confined space.
- Recovery: The top person will immediately attempt a non-entry rescue using the tripod and winch system.
- Emergency Services: The second operative (or site contact) will call 999 immediately.
- Information for Emergency Services: State the site address (Unit 4, Example Trading Estate, Exeter EX2 8XX), the nature of the incident ("Man down in a confined space, furnace chamber"), the suspected atmospheric conditions, and the best access point. Send someone to meet the emergency services at the site entrance.
- Supervisor: Inform the supervisor (A. Supervisor) immediately.
Suspension trauma: A person suspended in a harness can lose consciousness quickly. Rescue must be initiated immediately. When calling the ambulance, state that the casualty has been involved in a fall and is suspended in a harness.
Significant findings summary
This risk assessment has identified several significant risks, including:
- Confined space entry: This presents a risk of fatality. A formal permit-to-work system, including atmospheric testing and a practiced rescue plan, is mandatory before entry.
- Exposure to hazardous dusts (RCF/RCS): This presents a long-term health risk. Engineering controls to suppress dust at source are the primary control measure, supplemented by FFP3 respiratory protection.
- Electric shock: This presents a risk of fatality. All work must be carried out on circuits that have been proven dead using safe isolation procedures.
- Asbestos: The potential presence of asbestos in older plant requires confirmation before intrusive work. If found, only licensed contractors may work on it.
- Burns from residual heat: The furnace must be confirmed as sufficiently cool before work starts.
The responsible person, A. Supervisor, must ensure the control measures identified are fully implemented and that all operatives are briefed on these findings and the safe systems of work required.
Risk matrix key
| LIKELIHOOD | 1 (Very unlikely) | 2 (Unlikely) | 3 (Possible) | 4 (Likely) | 5 (Very likely) |
|---|---|---|---|---|---|
| SEVERITY | |||||
| 5 (Catastrophic) | 5 | 10 | 15 | 20 | 25 |
| 4 (Major) | 4 | 8 | 12 | 16 | 20 |
| 3 (Moderate) | 3 | 6 | 9 | 12 | 15 |
| 2 (Minor) | 2 | 4 | 6 | 8 | 10 |
| 1 (Insignificant) | 1 | 2 | 3 | 4 | 5 |
| RATING | ACTION |
|---|---|
| 16 - 25: Very High | Unacceptable, stop work, implement additional controls immediately |
| 10 - 15: High | Significant controls required, senior management attention |
| 5 - 9: Medium | Adequate controls required, monitor and review |
| 1 - 4: Low | Acceptable, manage by routine procedures |
Review
This risk assessment must be reviewed by 14 October 2027, or sooner if there is any significant change to the work activity, equipment used, location, personnel, or following any incident or near miss.
Declaration
I confirm that I have read and understood this Risk Assessment. I will comply with the specified control measures and safe systems of work. I have had the opportunity to ask questions.
| Name | Role | Signature | Date |
|---|---|---|---|
What a compliant Risk Assessment must contain
- Hazards specific to the actual task, site and materials
- Who might be harmed and how, for each hazard
- The controls already in place PLUS any further action needed
- A before/after risk score and a review date
Why a insulation installer's Risk Assessment gets rejected
- Copied from a generic example instead of written for the actual task
- Controls that don't match what the business actually does
- No record of who does the further actions, or by when
- An auto-fail hazard (confined space, asbestos, live electrical) wrongly marked 'N/A'
Already have one? Check it against the standard, free.
Paste it below and it is scored the way an inspector would, with the failings that would get it rejected. No sign-up.
Insulation Installers hazards it must cover
Typical insulation installer work, meaning loft, cavity wall, external wall and spray-foam insulation, brings hazards a Risk Assessment has to address:
- falls through ceilings from loft joists
- fibre and dust inhalation from mineral wool
- isocyanate exposure from spray foam (asthma)
- heat stress in lofts
- asbestos in older loft and wall materials
Generate your Risk Assessment in minutes
Built to the correct published standard for a insulation installer: specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your Risk AssessmentFAQ
Do insulation installers legally need a Risk Assessment?
A standalone risk assessment following HSE's 5 steps: who might be harmed and how, and the controls that make the work safe. For insulation installer work, meaning loft, cavity wall, external wall and spray-foam insulation, it is the document a client, principal contractor or inspector expects to see, grounded in MHSWR 1999 reg 3 (HSE): the 5-step method (INDG163).
What must an insulation installer's Risk Assessment contain?
At minimum: hazards specific to the actual task, site and materials; who might be harmed and how, for each hazard; the controls already in place PLUS any further action needed; A before/after risk score and a review date.
Why does an insulation installer's Risk Assessment get rejected?
The usual reasons: copied from a generic example instead of written for the actual task; controls that don't match what the business actually does; no record of who does the further actions, or by when; an auto-fail hazard (confined space, asbestos, live electrical) wrongly marked 'N/A'.
Which regulation is an insulation installer's Risk Assessment written under?
MHSWR 1999. The full text is on legislation.gov.uk at https://www.legislation.gov.uk/uksi/1999/3242/contents.
How fast can I get a Risk Assessment?
A couple of minutes. Describe the job, and RAMSReady writes a Risk Assessment for your exact insulation installer job live against the correct standard, with a review date and a sign-off/records section.
Not writing this one today?
We will email you a one page overview of what RAMSReady covers, so you have it when you need it.
Want to see how it would work for your firm?
Tell us roughly what you run and who keeps your records, and we will come back to you.