COSHH Assessment · Fire Extinguisher Servicing
COSHH Assessment for Fire Extinguisher Servicing
A COSHH assessment of the hazardous substances used or created, built from the product's Safety Data Sheet, the way HSE requires. Below: what a fire extinguisher technician's COSHH Assessment must contain, why they get rejected, and the hazards it has to cover, or generate one for your exact job in a couple of minutes.
What a compliant COSHH Assessment must contain
- Each substance with its hazard statements and CAS number from the SDS
- The Workplace Exposure Limit (EH40) where one exists, never invented
- Controls in the Reg 7 hierarchy (LEV/ventilation before RPE)
- Process-generated substances screened (dust, fume, silica)
Why a fire extinguisher technician's COSHH Assessment gets rejected
- Generic solvent boilerplate instead of the actual SDS hazards
- A Workplace Exposure Limit fabricated for a substance that has none
- Exposure risk credited mainly to gloves/masks (RPE is the LAST resort)
- Process dust/fume (wood dust, welding fume, RCS) not assessed
Already have one? Check it against the standard, free.
Paste your RAMS into the free checker and it scores it the way an inspector would, and flags exactly what would get it rejected. No sign-up.
Check yours freeFire Extinguisher Servicing hazards it must cover
Typical fire extinguisher technician work, meaning Inspecting, testing, recharging and maintaining portable fire extinguishers and fixed suppression systems in occupied and unoccupied premises across all sectors, brings hazards a COSHH Assessment has to address:
- Pressurised cylinder failure during discharge testing or recharging
- CO2 asphyxiation risk in confined or poorly ventilated spaces during cylinder venting
- Manual handling of heavy charged cylinders, particularly large CO2 and water units
- Exposure to dry powder or halon-substitute agents causing respiratory irritation
- Working in live premises with fire alarm interference, requiring coordination with building management
- Asbestos in pre-2000 fabric when drilling or fixing brackets to walls and ceilings
Generate your COSHH Assessment in minutes
Built to the correct published standard for a fire extinguisher technician: specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your COSHH AssessmentFAQ
Do fire extinguisher servicing legally need a COSHH Assessment?
A COSHH assessment of the hazardous substances used or created, built from the product's Safety Data Sheet, the way HSE requires. For fire extinguisher technician work, meaning Inspecting, testing, recharging and maintaining portable fire extinguishers and fixed suppression systems in occupied and unoccupied premises across all sectors, it is the document a client, principal contractor or inspector expects to see, grounded in COSHH 2002 reg 6/7 (HSE), built from the product Safety Data Sheet.
What makes a fire extinguisher technician's COSHH Assessment fail?
The usual reasons: Generic solvent boilerplate instead of the actual SDS hazards; A Workplace Exposure Limit fabricated for a substance that has none; Exposure risk credited mainly to gloves/masks (RPE is the LAST resort). RAMSReady generates one to the correct published form and avoids these.
How fast can I get a COSHH Assessment?
A couple of minutes. Describe the job, and RAMSReady writes a COSHH Assessment for your exact fire extinguisher technician job live against the correct standard, with a review date and a sign-off/records section.