RAMS · Fire Extinguisher Servicing
RAMS for Fire Extinguisher Servicing
A combined Risk Assessment & Method Statement, the site-ready document a principal contractor or client asks for before you start. Below: what a fire extinguisher technician's RAMS must contain, why they get rejected, and the hazards it has to cover, or generate one for your exact job in a couple of minutes.
What a compliant RAMS must contain
- A hazard table with a likelihood × severity score before and after controls
- Controls in the correct hierarchy (eliminate → substitute → engineering → admin → PPE last)
- A numbered, step-by-step method statement for the actual task
- PPE to BS EN standards, emergency arrangements, and an operative sign-off
Why a fire extinguisher technician's RAMS gets rejected
- Residual risk dropped from high to low on PPE or 'competent operatives' alone
- Generic hazards that could apply to any job
- No method statement, or one too vague to follow on site
- The wrong legal basis cited (e.g. 'CDM 2015 requires a RAMS')
Already have one? Check it against the standard, free.
Paste your RAMS into the free checker and it scores it the way an inspector would, and flags exactly what would get it rejected. No sign-up.
Check yours freeFire Extinguisher Servicing hazards it must cover
Typical fire extinguisher technician work, meaning Inspecting, testing, recharging and maintaining portable fire extinguishers and fixed suppression systems in occupied and unoccupied premises across all sectors, brings hazards a RAMS has to address:
- Pressurised cylinder failure during discharge testing or recharging
- CO2 asphyxiation risk in confined or poorly ventilated spaces during cylinder venting
- Manual handling of heavy charged cylinders, particularly large CO2 and water units
- Exposure to dry powder or halon-substitute agents causing respiratory irritation
- Working in live premises with fire alarm interference, requiring coordination with building management
- Asbestos in pre-2000 fabric when drilling or fixing brackets to walls and ceilings
Generate your RAMS in minutes
Built to the correct published standard for a fire extinguisher technician: specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your RAMSFAQ
Do fire extinguisher servicing legally need a RAMS?
A combined Risk Assessment & Method Statement, the site-ready document a principal contractor or client asks for before you start. For fire extinguisher technician work, meaning Inspecting, testing, recharging and maintaining portable fire extinguishers and fixed suppression systems in occupied and unoccupied premises across all sectors, it is the document a client, principal contractor or inspector expects to see, grounded in MHSWR 1999 reg 3 (HSE): the combined risk assessment + method statement contractors submit.
What makes a fire extinguisher technician's RAMS fail?
The usual reasons: Residual risk dropped from high to low on PPE or 'competent operatives' alone; Generic hazards that could apply to any job; No method statement, or one too vague to follow on site. RAMSReady generates one to the correct published form and avoids these.
How fast can I get a RAMS?
A couple of minutes. Describe the job, and RAMSReady writes a RAMS for your exact fire extinguisher technician job live against the correct standard, with a review date and a sign-off/records section.