Risk Assessment · Ductwork Installers
Risk Assessment for Ductwork Installers
A standalone risk assessment following HSE's 5 steps: who might be harmed and how, and the controls that make the work safe. Below: what a ductwork installer's Risk Assessment must contain, why they get rejected, and the hazards it has to cover, or generate one for your exact job in a couple of minutes.
What a compliant Risk Assessment must contain
- Hazards specific to the actual task, site and materials
- Who might be harmed and how, for each hazard
- The controls already in place PLUS any further action needed
- A before/after risk score and a review date
Why a ductwork installer's Risk Assessment gets rejected
- Copied from a generic example (HSE: 'would not satisfy the law')
- Controls that don't match what the business actually does
- No record of who does the further actions, or by when
- An auto-fail hazard (confined space, asbestos, live electrical) wrongly marked 'N/A'
Already have one? Check it against the standard, free.
Paste your RAMS into the free checker and it scores it the way an inspector would, and flags exactly what would get it rejected. No sign-up.
Check yours freeDuctwork Installers hazards it must cover
Typical ductwork installer work, meaning ventilation ductwork, kitchen extract, AHUs and fire dampers in commercial buildings, brings hazards a Risk Assessment has to address:
- working at height on towers and MEWPs with heavy sections
- cuts from sheet-metal edges
- manual handling of long duct runs
- hot works when cutting and sealing
- grease and fire risk on kitchen extract systems
Generate your Risk Assessment in minutes
Built to the correct published standard for a ductwork installer: specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your Risk AssessmentFAQ
Do ductwork installers legally need a Risk Assessment?
A standalone risk assessment following HSE's 5 steps: who might be harmed and how, and the controls that make the work safe. For ductwork installer work, meaning ventilation ductwork, kitchen extract, AHUs and fire dampers in commercial buildings, it is the document a client, principal contractor or inspector expects to see, grounded in MHSWR 1999 reg 3 (HSE): the 5-step method (INDG163).
What makes a ductwork installer's Risk Assessment fail?
The usual reasons: Copied from a generic example (HSE: 'would not satisfy the law'); Controls that don't match what the business actually does; No record of who does the further actions, or by when. RAMSReady generates one to the correct published form and avoids these.
How fast can I get a Risk Assessment?
A couple of minutes. Describe the job, and RAMSReady writes a Risk Assessment for your exact ductwork installer job live against the correct standard, with a review date and a sign-off/records section.