Method Statement · Ductwork Installers
Method Statement for Ductwork Installers
A safe system of work: the numbered, step-by-step sequence for carrying out the task safely, that an operative can actually follow. Below: what a ductwork installer's Method Statement must contain, why they get rejected, and the hazards it has to cover, or generate one for your exact job in a couple of minutes.
What a compliant Method Statement must contain
- A numbered sequence from set-up to clean-down
- The specific plant, equipment and isolation points named at each step
- Measurable checks where a step proves safety (e.g. prove dead, hold zero-pressure 30s)
- Competence requirements and PPE
Why a ductwork installer's Method Statement gets rejected
- Abstract steps ('isolate and verify') with nothing measurable
- A likelihood × severity scoring table bolted on (that belongs in the risk assessment)
- Steps that skip the actual sequence a job really follows
- No named competent person where the law requires one
Already have one? Check it against the standard, free.
Paste your RAMS into the free checker and it scores it the way an inspector would, and flags exactly what would get it rejected. No sign-up.
Check yours freeDuctwork Installers hazards it must cover
Typical ductwork installer work, meaning ventilation ductwork, kitchen extract, AHUs and fire dampers in commercial buildings, brings hazards a Method Statement has to address:
- working at height on towers and MEWPs with heavy sections
- cuts from sheet-metal edges
- manual handling of long duct runs
- hot works when cutting and sealing
- grease and fire risk on kitchen extract systems
Generate your Method Statement in minutes
Built to the correct published standard for a ductwork installer: specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your Method StatementFAQ
Do ductwork installers legally need a Method Statement?
A safe system of work: the numbered, step-by-step sequence for carrying out the task safely, that an operative can actually follow. For ductwork installer work, meaning ventilation ductwork, kitchen extract, AHUs and fire dampers in commercial buildings, it is the document a client, principal contractor or inspector expects to see, grounded in the recognised safe-system-of-work format (HSE guidance).
What makes a ductwork installer's Method Statement fail?
The usual reasons: Abstract steps ('isolate and verify') with nothing measurable; A likelihood × severity scoring table bolted on (that belongs in the risk assessment); Steps that skip the actual sequence a job really follows. RAMSReady generates one to the correct published form and avoids these.
How fast can I get a Method Statement?
A couple of minutes. Describe the job, and RAMSReady writes a Method Statement for your exact ductwork installer job live against the correct standard, with a review date and a sign-off/records section.