COSHH Assessment · Tilers
COSHH Assessment for Tilers
A COSHH assessment of the hazardous substances used or created, built from the product's Safety Data Sheet, the way HSE requires. Below: what a tiler's COSHH Assessment must contain, why they get rejected, and the hazards it has to cover, or generate one for your exact job in a couple of minutes.
What a compliant COSHH Assessment must contain
- Each substance with its hazard statements and CAS number from the SDS
- The Workplace Exposure Limit (EH40) where one exists, never invented
- Controls in the Reg 7 hierarchy (LEV/ventilation before RPE)
- Process-generated substances screened (dust, fume, silica)
Why a tiler's COSHH Assessment gets rejected
- Generic solvent boilerplate instead of the actual SDS hazards
- A Workplace Exposure Limit fabricated for a substance that has none
- Exposure risk credited mainly to gloves/masks (RPE is the LAST resort)
- Process dust/fume (wood dust, welding fume, RCS) not assessed
Already have one? Check it against the standard, free.
Paste your RAMS into the free checker and it scores it the way an inspector would, and flags exactly what would get it rejected. No sign-up.
Check yours freeTilers hazards it must cover
Typical tiler work, meaning wall and floor tiling, wet-room tanking, screeding and grouting, brings hazards a COSHH Assessment has to address:
- silica dust from cutting tiles (RCS, a carcinogen)
- cement dermatitis and burns from adhesives and grout
- kneeling and repetitive strain
- noise and vibration from cutters and grinders
- slips on wet floors and spilt adhesive
Generate your COSHH Assessment in minutes
Built to the correct published standard for a tiler: specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your COSHH AssessmentFAQ
Do tilers legally need a COSHH Assessment?
A COSHH assessment of the hazardous substances used or created, built from the product's Safety Data Sheet, the way HSE requires. For tiler work, meaning wall and floor tiling, wet-room tanking, screeding and grouting, it is the document a client, principal contractor or inspector expects to see, grounded in COSHH 2002 reg 6/7 (HSE), built from the product Safety Data Sheet.
What makes a tiler's COSHH Assessment fail?
The usual reasons: Generic solvent boilerplate instead of the actual SDS hazards; A Workplace Exposure Limit fabricated for a substance that has none; Exposure risk credited mainly to gloves/masks (RPE is the LAST resort). RAMSReady generates one to the correct published form and avoids these.
How fast can I get a COSHH Assessment?
A couple of minutes. Describe the job, and RAMSReady writes a COSHH Assessment for your exact tiler job live against the correct standard, with a review date and a sign-off/records section.