COSHH Assessment · Flooring Contractors
COSHH Assessment for Flooring Contractors
A COSHH assessment of the hazardous substances used or created — built from the product's Safety Data Sheet, the way HSE requires. Below: what a flooring contractor’s COSHH Assessment must contain, why they get rejected, and the hazards it has to cover — or generate one for your exact job in a couple of minutes.
What a compliant COSHH Assessment must contain
- Each substance with its hazard statements and CAS number from the SDS
- The Workplace Exposure Limit (EH40) where one exists — never invented
- Controls in the Reg 7 hierarchy (LEV/ventilation before RPE)
- Process-generated substances screened (dust, fume, silica)
Why a flooring contractor’s COSHH Assessment gets rejected
- Generic solvent boilerplate instead of the actual SDS hazards
- A Workplace Exposure Limit fabricated for a substance that has none
- Exposure risk credited mainly to gloves/masks (RPE is the LAST resort)
- Process dust/fume (wood dust, welding fume, RCS) not assessed
Already have one? Check it against the standard — free.
Paste your RAMS into the free checker and it scores it the way an inspector would, and flags exactly what would get it rejected. No sign-up.
Check yours freeFlooring Contractors hazards it must cover
Typical flooring contractor work — floor prep, screeding, tiling and floor-covering installation — brings hazards a COSHH Assessment has to address:
- adhesives, resins and solvents (COSHH)
- silica dust from grinding/screed
- manual handling and kneeling
- hand-arm vibration
Generate your COSHH Assessment in minutes
Built to the correct published standard for a flooring contractor — specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your COSHH AssessmentFAQ
Do flooring contractors legally need a COSHH Assessment?
A COSHH assessment of the hazardous substances used or created — built from the product's Safety Data Sheet, the way HSE requires. For flooring contractor work — floor prep, screeding, tiling and floor-covering installation — it is the document a client, principal contractor or inspector expects to see, grounded in COSHH 2002 reg 6/7 (HSE) — built from the product Safety Data Sheet.
What makes a flooring contractor's COSHH Assessment fail?
The usual reasons: Generic solvent boilerplate instead of the actual SDS hazards; A Workplace Exposure Limit fabricated for a substance that has none; Exposure risk credited mainly to gloves/masks (RPE is the LAST resort). RAMSReady generates one to the correct published form and avoids these.
How fast can I get a COSHH Assessment?
A couple of minutes. Describe the job, and RAMSReady writes a flooring contractor-specific COSHH Assessment live against the correct standard — with a review date and a sign-off/records section.