Method Statement · Shopfitters
Method Statement for Shopfitters
A safe system of work: the numbered, step-by-step sequence for carrying out the task safely, that an operative can actually follow. Below: what a shopfitter's Method Statement must contain, why they get rejected, and the hazards it has to cover, or generate one for your exact job in a couple of minutes.
What a compliant Method Statement must contain
- A numbered sequence from set-up to clean-down
- The specific plant, equipment and isolation points named at each step
- Measurable checks where a step proves safety (e.g. prove dead, hold zero-pressure 30s)
- Competence requirements and PPE
Why a shopfitter's Method Statement gets rejected
- Abstract steps ('isolate and verify') with nothing measurable
- A likelihood × severity scoring table bolted on (that belongs in the risk assessment)
- Steps that skip the actual sequence a job really follows
- No named competent person where the law requires one
Already have one? Check it against the standard, free.
Paste your RAMS into the free checker and it scores it the way an inspector would, and flags exactly what would get it rejected. No sign-up.
Check yours freeShopfitters hazards it must cover
Typical shopfitter work, meaning retail and commercial fit-out, joinery, partitions, ceilings and fixtures, often overnight, brings hazards a Method Statement has to address:
- working in occupied premises alongside the public and staff
- night working and fatigue
- wood dust and fixing-tool noise
- working at height on towers and podiums
- hot works and fire in occupied buildings
Generate your Method Statement in minutes
Built to the correct published standard for a shopfitter: specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your Method StatementFAQ
Do shopfitters legally need a Method Statement?
A safe system of work: the numbered, step-by-step sequence for carrying out the task safely, that an operative can actually follow. For shopfitter work, meaning retail and commercial fit-out, joinery, partitions, ceilings and fixtures, often overnight, it is the document a client, principal contractor or inspector expects to see, grounded in the recognised safe-system-of-work format (HSE guidance).
What makes a shopfitter's Method Statement fail?
The usual reasons: Abstract steps ('isolate and verify') with nothing measurable; A likelihood × severity scoring table bolted on (that belongs in the risk assessment); Steps that skip the actual sequence a job really follows. RAMSReady generates one to the correct published form and avoids these.
How fast can I get a Method Statement?
A couple of minutes. Describe the job, and RAMSReady writes a Method Statement for your exact shopfitter job live against the correct standard, with a review date and a sign-off/records section.