COSHH Assessment · Refrigeration Engineers
COSHH Assessment for Refrigeration Engineers
A COSHH assessment of the hazardous substances used or created, built from the product's Safety Data Sheet, the way HSE requires. Below: what a refrigeration engineer's COSHH Assessment must contain, why they get rejected, and the hazards it has to cover, or generate one for your exact job in a couple of minutes.
What a compliant COSHH Assessment must contain
- Each substance with its hazard statements and CAS number from the SDS
- The Workplace Exposure Limit (EH40) where one exists, never invented
- Controls in the Reg 7 hierarchy (LEV/ventilation before RPE)
- Process-generated substances screened (dust, fume, silica)
Why a refrigeration engineer's COSHH Assessment gets rejected
- Generic solvent boilerplate instead of the actual SDS hazards
- A Workplace Exposure Limit fabricated for a substance that has none
- Exposure risk credited mainly to gloves/masks (RPE is the LAST resort)
- Process dust/fume (wood dust, welding fume, RCS) not assessed
Already have one? Check it against the standard, free.
Paste your RAMS into the free checker and it scores it the way an inspector would, and flags exactly what would get it rejected. No sign-up.
Check yours freeRefrigeration Engineers hazards it must cover
Typical refrigeration engineer work, meaning Install, commission, maintain and decommission refrigeration and air-conditioning systems, including pipework, compressors, condensers and refrigerant circuits, in commercial and industrial premises, brings hazards a COSHH Assessment has to address:
- Refrigerant gases (HFCs, HCFCs, ammonia): pressure release, asphyxiation and toxic exposure
- Electrical isolation of high-voltage compressor and control equipment
- Pressurised systems: risk of uncontrolled release during brazing, pressure testing or component removal
- Ammonia (R717), an acutely toxic refrigerant requiring F-Gas and PSSR-compliant handling
- Working at height on rooftop plant and in plant rooms with restricted access
- Asbestos in pre-2000 plant room fabric and lagging disturbed during installation or maintenance
Generate your COSHH Assessment in minutes
Built to the correct published standard for a refrigeration engineer: specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your COSHH AssessmentFAQ
Do refrigeration engineers legally need a COSHH Assessment?
A COSHH assessment of the hazardous substances used or created, built from the product's Safety Data Sheet, the way HSE requires. For refrigeration engineer work, meaning Install, commission, maintain and decommission refrigeration and air-conditioning systems, including pipework, compressors, condensers and refrigerant circuits, in commercial and industrial premises, it is the document a client, principal contractor or inspector expects to see, grounded in COSHH 2002 reg 6/7 (HSE), built from the product Safety Data Sheet.
What makes a refrigeration engineer's COSHH Assessment fail?
The usual reasons: Generic solvent boilerplate instead of the actual SDS hazards; A Workplace Exposure Limit fabricated for a substance that has none; Exposure risk credited mainly to gloves/masks (RPE is the LAST resort). RAMSReady generates one to the correct published form and avoids these.
How fast can I get a COSHH Assessment?
A couple of minutes. Describe the job, and RAMSReady writes a COSHH Assessment for your exact refrigeration engineer job live against the correct standard, with a review date and a sign-off/records section.