Method Statement · Kitchen & Bathroom Fitters
Method Statement for Kitchen & Bathroom Fitters
A safe system of work: the numbered, step-by-step sequence for carrying out the task safely, that an operative can actually follow. Below: what a kitchen and bathroom fitter's Method Statement must contain, why they get rejected, and the hazards it has to cover, or generate one for your exact job in a couple of minutes.
What a compliant Method Statement must contain
- A numbered sequence from set-up to clean-down
- The specific plant, equipment and isolation points named at each step
- Measurable checks where a step proves safety (e.g. prove dead, hold zero-pressure 30s)
- Competence requirements and PPE
Why a kitchen and bathroom fitter's Method Statement gets rejected
- Abstract steps ('isolate and verify') with nothing measurable
- A likelihood × severity scoring table bolted on (that belongs in the risk assessment)
- Steps that skip the actual sequence a job really follows
- No named competent person where the law requires one
Already have one? Check it against the standard, free.
Paste your RAMS into the free checker and it scores it the way an inspector would, and flags exactly what would get it rejected. No sign-up.
Check yours freeKitchen & Bathroom Fitters hazards it must cover
Typical kitchen and bathroom fitter work, meaning rip-out and refit of kitchens and bathrooms, units, worktops, sanitaryware and second fix, brings hazards a Method Statement has to address:
- wood and MDF dust from cutting worktops and carcasses
- manual handling of worktops, baths and units in tight spaces
- electric shock and gas escape on disconnection and reconnection
- silica dust from stone and quartz worktops
- asbestos in pre-2000 floor tiles, textured coatings and boarding
Generate your Method Statement in minutes
Built to the correct published standard for a kitchen and bathroom fitter: specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your Method StatementFAQ
Do kitchen & bathroom fitters legally need a Method Statement?
A safe system of work: the numbered, step-by-step sequence for carrying out the task safely, that an operative can actually follow. For kitchen and bathroom fitter work, meaning rip-out and refit of kitchens and bathrooms, units, worktops, sanitaryware and second fix, it is the document a client, principal contractor or inspector expects to see, grounded in the recognised safe-system-of-work format (HSE guidance).
What makes a kitchen and bathroom fitter's Method Statement fail?
The usual reasons: Abstract steps ('isolate and verify') with nothing measurable; A likelihood × severity scoring table bolted on (that belongs in the risk assessment); Steps that skip the actual sequence a job really follows. RAMSReady generates one to the correct published form and avoids these.
How fast can I get a Method Statement?
A couple of minutes. Describe the job, and RAMSReady writes a Method Statement for your exact kitchen and bathroom fitter job live against the correct standard, with a review date and a sign-off/records section.