RAMS · Sign Installers
RAMS for Sign Installers
A combined Risk Assessment & Method Statement, the site-ready document a principal contractor or client asks for before you start. Below: what a sign installer's RAMS must contain, why they get rejected, and the hazards it has to cover, or generate one for your exact job in a couple of minutes.
What a compliant RAMS must contain
- A hazard table with a likelihood × severity score before and after controls
- Controls in the correct hierarchy (eliminate → substitute → engineering → admin → PPE last)
- A numbered, step-by-step method statement for the actual task
- PPE to BS EN standards, emergency arrangements, and an operative sign-off
Why a sign installer's RAMS gets rejected
- Residual risk dropped from high to low on PPE or 'competent operatives' alone
- Generic hazards that could apply to any job
- No method statement, or one too vague to follow on site
- The wrong legal basis cited (e.g. 'CDM 2015 requires a RAMS')
Already have one? Check it against the standard, free.
Paste your RAMS into the free checker and it scores it the way an inspector would, and flags exactly what would get it rejected. No sign-up.
Check yours freeSign Installers hazards it must cover
Typical sign installer work, meaning fascia, projecting, totem and illuminated sign installation and maintenance, brings hazards a RAMS has to address:
- working at height from MEWPs, towers and ladders over pavements
- manual handling of large sign panels in wind
- electric shock on illuminated signs and supplies
- pedestrians and traffic beneath the work area
- drilling into facades with hidden services
Generate your RAMS in minutes
Built to the correct published standard for a sign installer: specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your RAMSFAQ
Do sign installers legally need a RAMS?
A combined Risk Assessment & Method Statement, the site-ready document a principal contractor or client asks for before you start. For sign installer work, meaning fascia, projecting, totem and illuminated sign installation and maintenance, it is the document a client, principal contractor or inspector expects to see, grounded in MHSWR 1999 reg 3 (HSE): the combined risk assessment + method statement contractors submit.
What makes a sign installer's RAMS fail?
The usual reasons: Residual risk dropped from high to low on PPE or 'competent operatives' alone; Generic hazards that could apply to any job; No method statement, or one too vague to follow on site. RAMSReady generates one to the correct published form and avoids these.
How fast can I get a RAMS?
A couple of minutes. Describe the job, and RAMSReady writes a RAMS for your exact sign installer job live against the correct standard, with a review date and a sign-off/records section.