RAMS · Sign Fitters
RAMS for Sign Fitters
A combined Risk Assessment & Method Statement, the site-ready document a principal contractor or client asks for before you start. Below: what a sign fitter's RAMS must contain, why they get rejected, and the hazards it has to cover, or generate one for your exact job in a couple of minutes.
What a compliant RAMS must contain
- A hazard table with a likelihood × severity score before and after controls
- Controls in the correct hierarchy (eliminate → substitute → engineering → admin → PPE last)
- A numbered, step-by-step method statement for the actual task
- PPE to BS EN standards, emergency arrangements, and an operative sign-off
Why a sign fitter's RAMS gets rejected
- Residual risk dropped from high to low on PPE or 'competent operatives' alone
- Generic hazards that could apply to any job
- No method statement, or one too vague to follow on site
- The wrong legal basis cited (e.g. 'CDM 2015 requires a RAMS')
Already have one? Check it against the standard, free.
Paste your RAMS into the free checker and it scores it the way an inspector would, and flags exactly what would get it rejected. No sign-up.
Check yours freeSign Fitters hazards it must cover
Typical sign fitter work, meaning Supply and fix internal and external signage including fascia boards, projecting signs, built-up letters, illuminated units and wayfinding systems to commercial and public premises, brings hazards a RAMS has to address:
- Working at height on ladders, MEWP or scaffold to fix signage to elevations
- Electrical connection of illuminated signs requiring isolation and safe working on live systems
- Manual handling of large, heavy or awkward sign panels and frames
- Drilling and cutting into masonry or structural substrates releasing respirable crystalline silica (RCS)
- Contact with adhesives, solvents and vinyl laminates requiring COSHH assessment
- Asbestos in pre-2000 building fabric disturbed when drilling fixings
Generate your RAMS in minutes
Built to the correct published standard for a sign fitter: specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your RAMSFAQ
Do sign fitters legally need a RAMS?
A combined Risk Assessment & Method Statement, the site-ready document a principal contractor or client asks for before you start. For sign fitter work, meaning Supply and fix internal and external signage including fascia boards, projecting signs, built-up letters, illuminated units and wayfinding systems to commercial and public premises, it is the document a client, principal contractor or inspector expects to see, grounded in MHSWR 1999 reg 3 (HSE): the combined risk assessment + method statement contractors submit.
What makes a sign fitter's RAMS fail?
The usual reasons: Residual risk dropped from high to low on PPE or 'competent operatives' alone; Generic hazards that could apply to any job; No method statement, or one too vague to follow on site. RAMSReady generates one to the correct published form and avoids these.
How fast can I get a RAMS?
A couple of minutes. Describe the job, and RAMSReady writes a RAMS for your exact sign fitter job live against the correct standard, with a review date and a sign-off/records section.