Risk Assessment · Landscapers & Grounds Maintenance
Risk Assessment for Landscapers & Grounds Maintenance
A standalone risk assessment following HSE's 5 steps: who might be harmed and how, and the controls that make the work safe. Below: what a landscaper's Risk Assessment must contain, why they get rejected, and the hazards it has to cover, or generate one for your exact job in a couple of minutes.
What a compliant Risk Assessment must contain
- Hazards specific to the actual task, site and materials
- Who might be harmed and how, for each hazard
- The controls already in place PLUS any further action needed
- A before/after risk score and a review date
Why a landscaper's Risk Assessment gets rejected
- Copied from a generic example (HSE: 'would not satisfy the law')
- Controls that don't match what the business actually does
- No record of who does the further actions, or by when
- An auto-fail hazard (confined space, asbestos, live electrical) wrongly marked 'N/A'
Already have one? Check it against the standard, free.
Paste your RAMS into the free checker and it scores it the way an inspector would, and flags exactly what would get it rejected. No sign-up.
Check yours freeLandscapers & Grounds Maintenance hazards it must cover
Typical landscaper work, meaning hard and soft landscaping, planting and grounds maintenance, brings hazards a Risk Assessment has to address:
- petrol tools, strimmers and mowers (noise/HAVS)
- manual handling and lifting
- chemicals and green-waste
- working near traffic and the public
Generate your Risk Assessment in minutes
Built to the correct published standard for a landscaper: specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your Risk AssessmentFAQ
Do landscapers & grounds maintenance legally need a Risk Assessment?
A standalone risk assessment following HSE's 5 steps: who might be harmed and how, and the controls that make the work safe. For landscaper work, meaning hard and soft landscaping, planting and grounds maintenance, it is the document a client, principal contractor or inspector expects to see, grounded in MHSWR 1999 reg 3 (HSE): the 5-step method (INDG163).
What makes a landscaper's Risk Assessment fail?
The usual reasons: Copied from a generic example (HSE: 'would not satisfy the law'); Controls that don't match what the business actually does; No record of who does the further actions, or by when. RAMSReady generates one to the correct published form and avoids these.
How fast can I get a Risk Assessment?
A couple of minutes. Describe the job, and RAMSReady writes a Risk Assessment for your exact landscaper job live against the correct standard, with a review date and a sign-off/records section.