RAMS · Fire Alarm & Security Installers
RAMS for Fire Alarm & Security Installers
A combined Risk Assessment & Method Statement, the site-ready document a principal contractor or client asks for before you start. Below: what a fire and security installer's RAMS must contain, why they get rejected, and the hazards it has to cover, or generate one for your exact job in a couple of minutes.
What a compliant RAMS must contain
- A hazard table with a likelihood × severity score before and after controls
- Controls in the correct hierarchy (eliminate → substitute → engineering → admin → PPE last)
- A numbered, step-by-step method statement for the actual task
- PPE to BS EN standards, emergency arrangements, and an operative sign-off
Why a fire and security installer's RAMS gets rejected
- Residual risk dropped from high to low on PPE or 'competent operatives' alone
- Generic hazards that could apply to any job
- No method statement, or one too vague to follow on site
- The wrong legal basis cited (e.g. 'CDM 2015 requires a RAMS')
Already have one? Check it against the standard, free.
Paste your RAMS into the free checker and it scores it the way an inspector would, and flags exactly what would get it rejected. No sign-up.
Check yours freeFire Alarm & Security Installers hazards it must cover
Typical fire and security installer work, meaning fire-alarm, intruder, CCTV and access-control installation in occupied buildings, brings hazards a RAMS has to address:
- working at height on steps and towers in occupied premises
- drilling into ceilings and walls with hidden services and asbestos
- electric shock on panel and mains work
- lone working out of hours
- disruption to existing fire cover while systems are down
Generate your RAMS in minutes
Built to the correct published standard for a fire and security installer: specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your RAMSFAQ
Do fire alarm & security installers legally need a RAMS?
A combined Risk Assessment & Method Statement, the site-ready document a principal contractor or client asks for before you start. For fire and security installer work, meaning fire-alarm, intruder, CCTV and access-control installation in occupied buildings, it is the document a client, principal contractor or inspector expects to see, grounded in MHSWR 1999 reg 3 (HSE): the combined risk assessment + method statement contractors submit.
What makes a fire and security installer's RAMS fail?
The usual reasons: Residual risk dropped from high to low on PPE or 'competent operatives' alone; Generic hazards that could apply to any job; No method statement, or one too vague to follow on site. RAMSReady generates one to the correct published form and avoids these.
How fast can I get a RAMS?
A couple of minutes. Describe the job, and RAMSReady writes a RAMS for your exact fire and security installer job live against the correct standard, with a review date and a sign-off/records section.