Risk Assessment · Demolition Contractors
Risk Assessment for Demolition Contractors
A standalone risk assessment following HSE's 5 steps — who might be harmed and how, and the controls that make the work safe. Below: what a demolition contractor’s Risk Assessment must contain, why they get rejected, and the hazards it has to cover — or generate one for your exact job in a couple of minutes.
What a compliant Risk Assessment must contain
- Hazards specific to the actual task, site and materials
- Who might be harmed and how, for each hazard
- The controls already in place PLUS any further action needed
- A before/after risk score and a review date
Why a demolition contractor’s Risk Assessment gets rejected
- Copied from a generic example (HSE: 'would not satisfy the law')
- Controls that don't match what the business actually does
- No record of who does the further actions, or by when
- An auto-fail hazard (confined space, asbestos, live electrical) wrongly marked 'N/A'
Already have one? Check it against the standard — free.
Paste your RAMS into the free checker and it scores it the way an inspector would, and flags exactly what would get it rejected. No sign-up.
Check yours freeDemolition Contractors hazards it must cover
Typical demolition contractor work — soft-strip, structural demolition and site clearance — brings hazards a Risk Assessment has to address:
- asbestos and structural collapse
- plant and falling material
- silica dust and noise
- buried services
Generate your Risk Assessment in minutes
Built to the correct published standard for a demolition contractor — specific controls, the right legal basis, a review date and a sign-off section you can operate.
Start your Risk AssessmentFAQ
Do demolition contractors legally need a Risk Assessment?
A standalone risk assessment following HSE's 5 steps — who might be harmed and how, and the controls that make the work safe. For demolition contractor work — soft-strip, structural demolition and site clearance — it is the document a client, principal contractor or inspector expects to see, grounded in MHSWR 1999 reg 3 (HSE) — the 5-step method (INDG163).
What makes a demolition contractor's Risk Assessment fail?
The usual reasons: Copied from a generic example (HSE: 'would not satisfy the law'); Controls that don't match what the business actually does; No record of who does the further actions, or by when. RAMSReady generates one to the correct published form and avoids these.
How fast can I get a Risk Assessment?
A couple of minutes. Describe the job, and RAMSReady writes a demolition contractor-specific Risk Assessment live against the correct standard — with a review date and a sign-off/records section.