Trade-specific RAMS
Solar PV Installer RAMS Template
This comprehensive RAMS (Risk Assessment & Method Statement) template is specifically designed for UK Solar PV Installers, ensuring compliance with all relevant health and safety legislation. It meticulously covers the entire installation process, from initial site setup and roo…
- Risk Assessment table with likelihood × severity scoring
- Method statement — step-by-step safe procedure
- PPE requirements with BS EN standards
- Emergency procedures + sign-off section
- Add your company name + site detail in seconds
Sample preview
First sections of the document. Buy to download the full version as a branded PDF.
Solar PV Installer RAMS Template
Document Control
| Item | Detail Version: 1.0 Date: 2023-10-27 Author: [Your Company Name] H&S Department Review Date: 2024-10-27 Project Name: Solar PV Installation Site Address: [Client Site Address] Client: [Client Name] Principal Contractor: [Principal Contractor Name, if applicable] Site Manager/Supervisor: [Name] Contact Number: [Number] Emergency Contact: [Number]
Scope of Work
This Risk Assessment and Method Statement (RAMS) details the safe working procedures and control measures required for the installation of a grid-tied Solar Photovoltaic (PV) system on a domestic or commercial pitched roof property in the UK. The scope of work includes:
- Pre-installation Planning & Site Survey: Review of structural integrity, electrical infrastructure, access requirements, and identification of potential hazards.
- Site Establishment: Setting up a safe working area, securing access, and establishing welfare facilities.
- Access Equipment Erection: Safe erection, inspection, and use of scaffolding, tower scaffolds, or ladders as per the Work at Height Regulations 2005.
- Roof Preparation: Safe removal of roof tiles/slates, installation of roof hooks/mounting brackets, and weatherproofing.
- Mounting System Installation: Assembly and securing of the PV rail system to the roof structure.
- PV Panel Installation: Safe manual handling and securing of PV modules onto the rail system.
- DC Electrical Wiring: Connection of PV modules, string wiring, and routing of DC cables through the roof to the inverter location, ensuring correct polarity and isolation procedures.
- Inverter Installation: Mounting the inverter in the designated location and connecting DC and AC wiring.
- AC Electrical Wiring: Connection of the inverter to the consumer unit/distribution board, installation of AC isolators, and necessary circuit protection.
- Earthing & Labelling: Proper earthing of the PV array and system components, and clear labelling of all electrical components and isolation points as per BS 7671 (IET Wiring Regulations).
- Commissioning & Testing: Comprehensive testing of the PV
Full document includes the complete risk assessment table, method statement, PPE list, emergency procedures and sign-off.
Need RAMS for a specific job, not just a trade?
Use the AI generator at ramsready.co.uk — describe your exact job in plain English and get a fully tailored RAMS in 2 minutes. plans from £15/month.
Try AI generator